UKUKHUPHELA
Ibhanti yentsimbi yoShishino lokuTya- Isicelo seBelt:Umgca Wokupholisa Ikofu
- Ibhanti yentsimbi:I-AT1200 / I-AT1000
- Uhlobo lwentsimbi:Yenziwe ngentsimbi eshayinayo
- Tensile strength:1000/1200 Mpa
- Ubunzima:320/360 HV5
Iibhanti zentsimbi zomgca wokupholisa ikofu | Industry yokutya
Iibhanti zeMingke Stainless Steel zisetyenziswa kakhulu kushishino lokutya, njengomgca wokuvelisa ikofu epholileyo.
Iibhanti zentsimbi ezisebenzayo:
● Ibhanti yentsimbi engagqwaliyo ye-AT1200.
● Ibhanti yentsimbi engagqwaliyo ye-AT1000.
Ububanzi bobonelelo lweeBelts:
| Imodeli | Ubude | Ububanzi | Ubukhulu |
| ● I-AT1200 | ≤150 m/pc | 600~2000 mm | 0.6 / 0.8 / 1.0 / 1.2 mm |
| ● I-AT1000 | 600~1550 mm | 0.6 / 0.8 / 1.0 / 1.2 mm |
Iimpawu zeMingke Belts zoMgca wokupholisa ikofu:
● Amandla amakhulu okuxinana/ukukhupha/ukudinwa
● Umphezulu oqinileyo nogudileyo
● Ukuthe tye nokuthe tye okugqwesileyo
● Ukusebenza kakuhle kokupholisa
● Ukumelana nokuguguleka okubalaseleyo
● Ukumelana kakuhle nokugqwala
● Kulula ukuyicoca nokuyilungisa
● Akulula ukugogeka xa kushushu kakhulu
Iintambo ze-V zerabha:
Kwintambo yokupholisa ikofu, iMingke inokubonelela ngeentlobo ezahlukeneyo zeentambo zerabha ze-v zokulandelela intsimbi kwiinketho.
Kwishishini lokutya, singabonelela ngeeNkqubo ezahlukeneyo zoLandelo lweNyaniso kwiindlela ezahlukeneyo zokuhambisa iibhanti zentsimbi, ezifana neMKCBT, MKAT, MKHST, MKPAT, kunye neendawo ezincinci ezifana neGraphite Skid Bar.